Dynamic prediction in functional concurrent regression with sparse functional covariates

This vignette is intended to show users how to fit functional concurrent regression models and then perform dynamic prediction using the fcr package. The analysis here mirrors the data application in Leroux et. al (2017).

The fcr package was created to fit functional concurrent models when the functional response and predictor are irregularly measured. We note that regularly spaced functional concurrent regression models can be fit using this package, but if dynamic prediction is not of interest and the data are regularly spaced,
the refund package likely provides substantial computational gains over the fcr package.

Model

The fcr() function is a wrapper for mgcv::gam()/mgcv::bam() and face::face.sparse(). The mean model specification syntax of fcr() is that of mgcv::gam(). This function fits models of the form

Yij = f0(tij) + β1Xi + f2(tij)Zij + f3(Zij) + f4(Zij, tij) + ⋯ + bi(tij) + ϵij Where bi(tij) is denotes a random function intercept and ϵij are iid normally distributed noise. We assume the functional random intercept and white noise terms are independent. The fcr() function does not currently allow non-identity link functions for the response.

CONTENT data

The fcr package contains simulated child growth data. Below, we present a model fitting procedure and show how to perform dynamic prediction, and plot the results.

In this data, we have two irregularly measured growth indicators, height for age (haz) and weight for age (waz), as well as a time-invariant covariate indicating the sex of the child (Male). We allow for time varying coefficients on both the gender covariate, and concurrently measured waz. More precisely, our model is

HAZij = f0(tij) + f1(tij)Malei + f2(tij)WAZij + bi(tij) + ϵij

In this data, both HAZ and WAZ are measured with noise, and so the first step is to smooth the noisy WAZ covariate. Here, we smooth using functional principal component analysis via the face package.

Fit the model

library(fcr)
## split the data into training and test data
data_full <- content
data      <- subset(data_full, include == 1)  ## data used in model fitting
data_test <- subset(data_full, include == 0)  ## out-of-sample data used in dynamic prediction
rm(list="data_full")

k <- 12 # number of interior knots for fpca (results in k + 3 basis functions)

## Specify the functional domain where we want to make predictions.
## We need to add in the times of observation for the test data
tnew <- sort(unique(c(data$argvals, data_test$argvals)))

###########################################
## Step 1: Smooth time-varying covariate ##
###########################################
dat.waz <- data.frame("y" = data$waz, "subj" = data$subj, argvals = data$argvals)
fit.waz <- face.sparse(dat.waz, newdata = dat.waz, knots = k, argvals.new = tnew)
data$wazPred <- fit.waz$y.pred

Once we have the smooth functional covariate, we are ready to fit our model.

#####################
## Step 2: Fit fcr ##
#####################

K <- 15 # dimenson of smooth for time varying coefficients

## The mean model in order of the formula presented below:
##     E[Y_{ij}] = f_0(t_{ij}) + f_1(t_{ij})Male_i + f_2(t_{ij})\tilde{WAZ}_{ij}
## note that we do not specify any random effects. That is done internally by fcr()
fit <- fcr(formula = Y ~ s(argvals, k=K, bs="ps") + 
                         s(argvals, by=Male, k=K, bs="ps") + 
                         s(argvals, by=wazPred, bs="ps"),
           argvals = "argvals", subj="subj", data=data, use_bam=TRUE, argvals.new=tnew,
           face.args = list(knots=k, pve=0.99))

Visualize the data

Below we plot the data. The panels in the top row correspond to the estimated f0, f1, f2. The bottom three panels correspond features of the estimate covariance function.

#####################
## Examine results ##
#####################

## plot coefficients
par(mfrow=c(2,3),las=1)
for(k in 1:3) plot(fit,select=k)
# plot covariance function
plot(fit, plot.covariance=TRUE)
The top three panels present the estimated coefficient functions f_0, f_1, f_2 along with pointwise 95% confidence intervals. The figures are by default created using plot.gam(). The bottom three panels visualize the features of the covariance function.
The top three panels present the estimated coefficient functions f0, f1, f2 along with pointwise 95% confidence intervals. The figures are by default created using plot.gam(). The bottom three panels visualize the features of the covariance function.

Prediction

Dynamic prediction in a functional concurrent model

Dynamic prediction in a functional concurrent model is complicated by the fact that we require a value for the functional covariate at the time where we wish to dynamically predict the outcome of interest.

The solution proposed in Leroux et. al (2017) is to use fpca to dynamically predict the covariate values, then use those predictions as our covariate in the functional concurrent model. As a result, for each new set of dynamic predictions, the functional covariate must be re-estimated.

Suppose we wise to make dynamic predictions for a subject for t > tm for some t, tm < tmax where tmax is the maximum value of the functional domain used in model fitting. The procedure can for dynamic prediction can be summarized in the following steps

  1. Create a new data frame (newdata) with all available data for the subject up to tm
  2. Insert new rows of subject data into newdata with NA values for the functional covariate and response. The functional domain variable in these rows should indicate the t for which dynamic predictions are desired.
  3. Use fpca (or another prediction procedure) to smooth and dynamically predict the functional covariate at observed times and “unobserved” times, respectively. Do not use this subject’s data beyond tm (if available) to make these predictions.
  4. If subjects were used in data fitting, re-assign their subject identifiers to a value not used in model fitting.
  5. Supply fitted fcr object and newdata to predict.fcr()

Note that step (4) above is required by the fcr() function to distinguish dynamic prediction from “in-sample” prediction. We provide an example of both in-sample and dynamic prediction in the code below.

Dynamic versus in-sample prediction in fcr

The predict.fcr() function allows for both in-sample and dynamic prediction. For in-sample prediction, the estimated BLUPs from mgcv::bam()/mgcv::gam() are used. Only subjects included in model fitting can be used for in-sample prediction.

In contrast, dynamic prediction is performed on subjects not included in model fitting as indicated by the “subj” identifier. Note that dynamic predictions for subjects that were included in model fitting can be retrieved by assigning them a new subject id in the “newdata” argument to predict.fcr().

The difference between dynamic predictions and in-sample predictions manifests in two ways.

First, suppose we observe data on subject i at times 1, 2, …, 10 and fit the model on this data. If we supply subject i’s data for times 1, 2, 3 and NA values at times 4, …, 10, in-sample prediction will provide the same predictions as if we had included all times 1, …, 10 in the new data. In contrast, dynamic prediction for this subject will re-estimate this subjects’ BLUPs using only the available data (t = 1, 2, 3). Generally, these two predictions will not be equal.

Second, suppose we’re in the scenario mentioned above, but we supply all the subjects’ data to the predict function. The predicted values will be the same (up to a negligible difference that arises from the differing matrix algebra operations used), but the standard errors will differ. This is because the standard errors calculated for in-sample prediction take into account the estimated covariance of the random effects with fixed effects (see ?predict.gam for more details). Dynamic predictions, in contrast, assume independence between random effects and fixed effects.

We illustrate these differences in the code below.

## do in-sample and dynamic prediction for subject 1
data_pred <- subset(data, subj==1)

## make two separate dataframes for dynamic prediction
## and create make new subject id not used in model fitting
data_pred_dyn      <- data_pred_dyn2      <- data_pred
data_pred_dyn$subj <- data_pred_dyn2$subj <- data_pred_dyn$subj + 10000

## make "observed data" beyond t=0.5 NA
data_pred_dyn$Y[data_pred_dyn$argvals >= 0.5]   <- NA
data_pred_dyn$waz[data_pred_dyn$argvals >= 0.5] <- NA

## calculate dynamic waz scores
data_dyn_waz         <- data.frame("y" = data_pred_dyn$waz,
                                   "subj" = data_pred_dyn$subj,
                                   "argvals" = data_pred_dyn$argvals)
data_pred_dyn$wazPred <- predict(fit.waz, newdata=data_dyn_waz)$y.pred


## perform predictions
in_samp <- predict(fit, newdata=data_pred, se.fit=TRUE)
dyn     <- predict(fit, newdata=data_pred_dyn)
dyn2    <- predict(fit, newdata=data_pred_dyn2)

Perform dynamic prediction on the test data set

Below we show how to perform dynamic prediction for all subjects in the test dataset using data up to tm = 0.5. We also supplement the dataset with NA values on a fine grid over the range of the functional domain to show how the procedure results in smooth fitted curves and pointwise confidence/prediction intervals.

## perform dynamic prediction for test subjects
## on the last 1/2 of the functional domain
data_dyn <- data_test
data_dyn$Y[data_dyn$argvals >= 0.5]   <- NA
data_dyn$waz[data_dyn$argvals >= 0.5] <- NA

## remove smoothed waz -- dyanmic predictions calculated shortly
data_dyn$wazPred <- NULL


set.seed(1012341)
ids <- sample(unique(data_dyn$subj), 4, replace = FALSE)


data_plot <- c()
for(i in 1:length(ids)){
        tmp <- subset(data_dyn, subj %in% ids[i])
        ut_tmp <- tnew[!tnew %in% tmp$argvals & tnew > min(tmp$argvals)]
        n_ut <- length(ut_tmp)
        empty_dat <- data.frame("Y" = rep(NA,n_ut),
                                "Ytrue" = rep(NA,n_ut),
                                "X" = rep(NA,n_ut),
                                "waz.true"=rep(NA,n_ut),
                                "waz"=rep(NA,n_ut),
                                "Male" = rep(tmp$Male[1], n_ut),
                                "argvals"=ut_tmp,
                                "subj"=rep(tmp$subj[1],n_ut),
                                "include"=rep(0,n_ut))
        tmp <- rbind(tmp, empty_dat)
        tmp <- tmp[order(tmp$argvals),]
        
        data_plot <- rbind(data_plot, tmp)
        rm(list=c("tmp","ut_tmp","n_ut","empty_dat"))
}

data_dyn <- data_plot
rm(list=c("data_plot"))

## get dynamic waz predictions
data_dyn_waz     <- data.frame("y" = data_dyn$waz, "subj" = data_dyn$subj, "argvals" = data_dyn$argvals)
data_dyn$wazPred <- predict(fit.waz, newdata=data_dyn_waz)$y.pred

preds <- predict(fit, newdata=data_dyn)$dynamic_predictions
par(mfrow=c(2,2),las=1)
for(i in 1:length(ids)){
        inx <- which(data_dyn$subj==ids[i])
        inx2 <-which(data_test$subj==ids[i])
        
        yl  <- range(c(preds$fitted.values$y.pred[inx] + 
                               rep(c(1,-1),each=length(inx))*1.96*preds$fitted.values$se.fit.p[inx],
                       data_test$Y[inx2]))

        plot(preds$data$argvals[inx], preds$fitted.values$y.pred[inx],type='l',
             main = paste("Subject",i),xlab="Functional Domain", ylab="Response",
             xlim=c(0,1), ylim=yl)
        lines(preds$data$argvals[inx], lty=2,
              preds$fitted.values$y.pred[inx] - 1.96*preds$fitted.values$se.fit[inx],col='blue')
        lines(preds$data$argvals[inx], lty=2,
              preds$fitted.values$y.pred[inx] + 1.96*preds$fitted.values$se.fit[inx],col='blue')
        
        lines(preds$data$argvals[inx],  lty=2,
              preds$fitted.values$y.pred[inx] - 1.96*preds$fitted.values$se.fit.p[inx],col='red')
        lines(preds$data$argvals[inx],  lty=2,
              preds$fitted.values$y.pred[inx] + 1.96*preds$fitted.values$se.fit.p[inx],col='red')
        axis(1,0.5,labels=expression(t[m]))
        
        points(data_test$argvals[inx2],data_test$Y[inx2])
        
        abline(v=0.5,col='grey',lty=2)
        if(i == 4){
                legend("top",c("Observed Data","fcr() Prediction","95% Confidence Interval","95% Prediction Interval"),
                       col=c("black","black","blue","red"),bty="n",pch=c(1,NA,NA,NA), lty = c(NA,1,2,2))
        }
}
Dynamic prediction for four subjects. The solid black line represents the predicted curve, dashed blue and red lines indicate 95% confidence and prediction intervals, respectively. Predictions use only the data up to t_m = 0.5 to make predictions.
Dynamic prediction for four subjects. The solid black line represents the predicted curve, dashed blue and red lines indicate 95% confidence and prediction intervals, respectively. Predictions use only the data up to tm = 0.5 to make predictions.